| Model: | (F) BS-35 |
| Type: | Combustion type: Steam pressure |
| Exhaust: | Forced |
| Application: | Hot water supply |
| Ignition: | High voltage spark discharge |
| Fuel type: | Kerosene or green diesel |
| Fuel consumption: | 4.0 L/h |
| Efficiency: | 85.7% |
| Heating output: | 120,000 BTU/h (35.2 kW) |
| Heat exchanger capacity: | 8.8 L (max pressure) |
| Pressure resistance: | 1 bar (100 kPa) |
| Power supply: | AC220V / 50Hz |
| Power consumption: | Ignition: 117 W / Burning: 97 W |
| Ambient operating temp: | -20 to 40 °C |
| Noise level: | 53 dB |
| Dimensions (W×D×H): | 260 × 510 × 700 mm |
| Weight: | 25 kg |
| Exhaust air temp: | Below 260 °C |
| Exhaust pipe diameter: | 106 mm |
| Nozzle capacity: | 1.0 GPH |
| Spray pattern: | Danfoss KH, 60° spray angle |
| Safety devices: |
1. Automatic combustion control 2. Flame sensor 3. Overheat protector 4. Power failure recovery system 5. Fuel filter 6. Bi-metal heat exchanger |
| Accessories: | Remote controller (1), 8m remote control cable |
Lotus-type ignition burner
Provides quick ignition with less noise during operation. Compact design with stable combustion.
Lotus-type heat exchanger
Achieves 85.7% efficiency and ensures high resistance to heat and pressure, with multiple tubes on the upper part and the burner at the lower part.
The heater includes multiple safety mechanisms, including:
Automatic tip-over shutoff (Tip-over switch)
Overheat protection with bi-metal switch
Combustion control unit prevents fire accidents, malfunctions, or misuse
Protects the heat exchanger from cracking due to freezing.